Automotive Design and Production

MAY 2014

Automotive Design & Production is the one media brand invested in delivering your message in print, online, via email, and in-person to the right automotive industry professionals at the right time.

Issue link: https://adp.epubxp.com/i/301356

Contents of this Issue

Navigation

Page 43 of 51

Magna ( magna.com ) didn't need to load us onto a bus and drive 350 miles north up I-75 to show of its latest all-wheel drive technology. During the blustery winter of 2014, the snow-covered roads of metro Detroit would have sufced just fne. Nevertheless, we cross the Mackinac Bridge over the frozen straits, and drive farther north into the Upper Peninsula to a snow testing facility in Brimley, MI—not too far from where the Edmund Fitzgerald met its doom in Lake Superior when those "gales of November came early." In this case it was January and those gales had dumped a considerable amount of snow on the UP. Upon arrival, we hop in a Land Rover LR2 equipped with Magna's FLEX4 all-wheel-drive (AWD) disconnect system that shuts of torque to the rear wheels (in the case of a front-wheel drive vehicle) when it isn't required. There are a number of these systems on the road now described with adjectives like "adaptive" and "agile," but Magna engineers say the prototype FLEX4 system is unlike any other because it is "intuitive." Unlike existing systems, which send a torque signal to engage AWD after detecting a wheel slip event, the Magna Flex4 system anticipates potentially slick conditions and engages AWD before any slippage occurs. To do this efectively, the system leverages Magna's "Climate Trac" technology, taking inputs from the windshield wipers and rear-window defroster—in addition to wheel, body and powertrain sensors— to determine if AWD should be engaged. "Most of the time you don't need AWD in normal city or highway driving," explains Ajit Khatra, product engineer for AWD systems. He suggests that "normal" accounts for as much as 80% of the time behind the wheel. So the objective is to seamlessly engage AWD only when needed so as to minimize friction-related and other losses associated with unnecessary engage- ment and then—again seamlessly and within milliseconds—to reengage it when conditions warrant. When a vehicle is at a stop, AWD is engaged to ofer maximum traction upon takeof, but once it reaches 20 mph or more, provided traction is sufcient, the FLEX4 system disconnects the rear wheels. If a road is snow covered but smooth, the AWD remains disengaged until road conditions deteriorate or a hard turn, or yaw event, is being made. Snow or ice isn't required; FLEX4 will automatically engage on dry pavement depending on surface conditions or driver inputs. The architecture of the FLEX4 system consists of a power take-of unit (PTU) with a Magna-patented disconnect system in the front axle and couplings on the rear axle with twin dog clutches. Instead of using friction, clutches use teeth cut into one shaft to ft into recesses on the other, allowing them to turn at the same speed without slipping. This allows for greater durability and fuel efciency, Magna engineers say, because slippage causes parasitic losses and wears the clutch out faster. A single clutch design is also feasible, the engineers add, though the demonstration vehicle has two clutches. "FLEX4 functions like a CVT in terms of front output torque," says Ron Frawley, the global product manager for transfer cases/4WD systems. "This also gives OEMs a chance to vary torque distribution," he adds. This additional beneft allows OEMs to "tune to the brand," or code the software accordingly to have the torque distribution refect the desired driving dynamics of a particular vehicle make. The FLEX4 system remains a prototype for now. However, Magna has a production award with an unnamed European OEM, and start of serial production is anticipated in 2016. Snow-Tested, "Intuitive" AWD A prototype all-wheel-drive disconnect system by Magna responds to changing road conditions before tires lose traction. To prove its vigor, Magna tests the system in the Upper Peninsula of Michigan. p A Land Rover LR2 equipped with Magna's FLEX4 AWD disconnect system traverses a snow-covered feld at a snow testing facility in Michigan's Upper Peninsula. p An integral element of the Magna FLEX4 AWD disconnect system is the power take-of unit (PTU), which allows a vehicle to run in 2WD for the majority of driving conditions, and switch to AWD only when slip events are anticipated. AD&P; > May 2014 > FEATURE > Snow-Tested, "Intuitive" AWD 42 0514ADP FEATURE Magna.indd 42 4/22/2014 1:32:06 PM

Articles in this issue

Links on this page

Archives of this issue

view archives of Automotive Design and Production - MAY 2014